Protector BLAST II fire and rescue boots

Height	33 cm
Weight	2.4 kg
Material	Leather
Outsole	Rubber
Type	(D) High
Lining	Textile + membrane
Properties	Steel chapel + steel insole
EN 20345	Specifies safety footwear for professional use, which is marked with the letter "S". The basic parameter of safety footwear is the built-in impact-resistant tip 200J.
S3	Antistatic properties, resistance of the sole to fuels, absorption of heel energy, penetration and absorption of water, puncture resistance
A	Antistatic shoes
CI	Cold resistance
HI	Thermal resistance of the lower part of the shoe
HIPPO	Resistance of the sole to contact heat up to 300 ° C
WRU	Resistance to water penetration and water absorption
SRA	Non-slip sole for floors with ceramic tiles with SLS (sodium lauryl sulfate solution)
HV	Highly visible elements
EN 15090	Specifies safety shoes for fire extinguishing applications that are marked with the letter "F"
F2	Fire fighting and rescue operations with sole protection and protective tip, no chemical protection
AN	Ankle protection

Construction D - knee-high boots
Code according to classification: I - footwear made of leather and other materials, with the exception of all-rubber or all-plastic footwear
F2A - footwear for firefighters, type 2
HI3 - heat insulation, the third level of thermal resistance
AN- ankle protection
CI - sole insulation against the cold
SRC - slip resistance on ceramic and steel substrates
Available sizes: 36-50

Upper material - natural, smooth cowhide leather, waterproof and heat-resistant
Lining - TE-POR type fabric with vapor-permeable and water-resistant membrane, insulates against cold and heat
Tužinka - steel
Midsole (safety insole) - elastic material resistant to punctures
Insole - insole material or carbon insert
Double fastening system (heat-resistant laces and metal zipper)
Sole - rubber, heat resistant
Sole assembly technology - gluing
Reflective materials incorporated into the construction of the upper ensure the user's visibility and increase his safety;
The special construction of the sole pattern with a system of gaps, perfectly removes dirt and increases adhesion to the substrate

The water-resistant upper part - at least 80 minutes and sunlight - temperature rise does not exceed 24 ° C for 40 seconds.
Flame resistant footwear - the time of subsequent flame burning and subsequent smoldering does not exceed 2 seconds.
The footwear meets the requirements for thermal insulation of the sole - 3rd level of thermal resistance (increase in temperature inside the footwear does not exceed 42 ° C for 10 minutes).
The footwear meets the requirements for insulation of the bottom from the cold (the temperature drop on the upper surface of the sole does not exceed 10 ° C). The footwear protects the toes against an energy impact of 200 J and a compression force of 15 kN.
The shoes protect the feet against punctures with a force of 1100 N.
The footwear meets the requirements for ankle protection (average value of transmitted force does not exceed 10 kN and each individual value does not exceed 15 kN)
The footwear meets the requirements for energy absorption in the heel area (above 20 J).
The shoes have antistatic properties.