Info legali

When you visit any website, it may store or retrieve information on your browser, mostly in the form of 'cookies'. This information, which might be about you, your preferences, or your internet device (computer, tablet or mobile), is mostly used to make the site work as you expect it to. You can find out more about how we use cookies on this site, and prevent the setting of non-essential cookies, by clicking on the different category headings below. However, if you do this then it may impact your experience of the site and the services we are able to offer.



Catalogo e listino prezzi


ZEMAN catalogue EUR - Open
ZEMAN catalogue USD - Open

Price list

ZEMAN price list EUR - Open
ZEMAN price list USD - Open


FIRESTAR-PC F2A stivali di gomma azione antincendio Visualizza ingrandito

FIREFIGHTER-H F2I stivali di gomma azione antincendio

Nuovo prodotto

6 Articoli

Con l'acquisto di questo prodotto è possibile raccogliere fino a 5 Punti fedeltà. Il totale del tuo carrello 5 Punti fedeltà può essere convertito in un buono di € 1.50.

€ 52.50

  • EU35-UK3
  • EU36-UK3.5
  • EU37-UK4
  • EU38-UK5
  • EU39-UK6
  • EU40-UK6.5
  • EU41-UK7
  • EU42-UK8
  • EU43-UK9
  • EU44-UK9.5
  • EU45-UK10
  • EU46-UK11
  • EU47-UK12
  • EU48-UK13
  • EU49-UK13.5
  • EU50-UK14

Scheda tecnica

Altezza34 cm
Peso3,0 kg
Tipo(D) Top
CaratteristicaPuntale in acciaio + Soletta in acciaio
ISO EN 15090Specifies safety boots for firefighting uses marked by letter "F"
ISO EN 20345Specifies safety boots for professional uses marked by letter "S". The basic feature of safety boots is a in-built toe puff withstanding 200 J impacts.
ISO EN 50321 class 0Calzature dielettrica per lavori su impianti a bassa tensione fino a 1000V
AAntistatic footwear
CICold resistant
HIHeat resistant on bottoms
HROOutsoles resistant to contact heat up to 300°C
FOBoots resistant to oils and fuels
F2Fire suppression and rescue with penetration and toe protection, without chemical protection
EEnergy absorption in heels
IElectrical insulation boots
PPuncture resistant
SBToe cap 200J, boots comply with basic requirements only
SRASlip resistance on floors with ceramic tiles with SLS (sodium lauryl ether sulfate solution)


Prevent slippery performance: firefighters extinguishing protective rubber boots in the antiskid performance test, slip Angle of not less than 15 °
Anti-smashing performance: the boots of the fireman's fire protection rubber boots are respectively 1078 KN static pressure test and the impact hammer quality of 23KG, and the height of the impact test after the falling height is 300MM, and the clearance height is not lower than 15MM.
Anti-puncture performance: the puncture resistance of the fireman's protective rubber boots is not less than 1100N.
Anti-cutting performance: the firefighter's protective rubber boots are cut with a total weight of 800G without being punctured.
Electrical insulation performance: the breakdown voltage of the fireman's fire protection rubber boots is not less than 5000V, and the leakage current is less than 3MA.
Thermal insulation performance: when the fireman's fire protection rubber boots are heated for 30MIN during the heat insulation performance test, the temperature on the surface of the sole is not greater than 22.
Acid-proof alkaline can: firefighters extinguishing protective rubber material sample at a temperature of 23 ℃ + 2 ℃ to 3.7 MOL/L of acid and alkali, 6.0 MOL/L sodium hydroxide solution after 70 h + 2 h, no significant change in physical and mechanical properties.
Oil resistant performance: firefighters extinguishing protective rubber material sample at a temperature of 23 ℃ + 2 ℃ for 1 # standard oil soaked for 24 hours, volume change within - 2 - + 10%.
Thermal radiation penetration resistance: firefighters extinguishing protective rubber boots surface by the radiant heat flux is 10 kw / ㎡ + 1 kw / ㎡, 1 min after irradiation, its surface is not more than 22 ℃.
  • Heat insulation performance (℃) of 13.6 or less
  • The puncture performance is greater than 1560N
  • Anti - smashing performance (mm) >15 anti - cutting
  • Flame retardant performance (grade) fv-1
  • Rubber boot breakdown voltage >5000V
  • Oil resistance (%) -2 ~ +10 tensile strength MPa is greater than 14.7 or greater than 10.78
  • The elongation % is greater or greater than 480
  • Tear permanent deformation % less than 40
  • Abrasion loss (akron) cm3/1.6km = 0.8
  • Intensity (shaoer A) degree 55~65 55~70
  • Brittle temperature 40 ℃ - or less - 40 or less
  • Hot air ageing (100 metres by 24h)
  • The breaking strength is reduced by % less than 35 or less than 35
  • Flame retardant performance (GB/T13488) grade fv-1 fv-1
  • Adhesive strength boots face and fabric N/mm 0.78


Reviews | Recenze | Bewertungen | Отзывы | Comentarios | Recensioni | Commentaires | التعليقات


Ancora nessuna recensione da parte degli utenti.

Scrivi una recensione

FIREFIGHTER-H F2I stivali di gomma azione antincendio

FIREFIGHTER-H F2I stivali di gomma azione antincendio

30 altri prodotti della stessa categoria:




Scarica (97.42k)